CoatXpert Coating Professional’s Quick Reference
Your everyday technical reference for coating inspection, testing and quality control.
Coating professionals often need to quickly check a formula, convert a unit, identify a suitable test method, verify environmental conditions or record QC results. Searching through multiple standards, technical datasheets and calculation sheets can take valuable time.
The CoatXpert Coating Professional’s Quick Reference brings these frequently used technical topics together in one compact A5 professional handbook.
Designed for coating inspectors, QC professionals, paint-shop supervisors, laboratory technicians, applicators and coating engineers, this reference is intended to be useful both at the QC desk and in the field.
What’s Inside?
Daily Calculations
- Paint consumption and theoretical coverage
- Volume solids and weight solids
- WFT–DFT relationship
- Mixing ratios
- Thinner/reducer calculations
- Temperature, pressure and unit conversions
- Practical coating quantity calculations
Coating Testing
- Dry Film Thickness (DFT)
- Wet Film Thickness (WFT)
- Cross-Hatch Adhesion
- Pull-Off Adhesion
- Pencil Hardness
- Gloss
- Colour Measurement
- ΔE
- Abrasion Resistance
- Impact Resistance
- Flexibility / Mandrel Bend
- Solvent Rub Resistance
- Chemical Resistance
- Scratch & Mar Resistance
Surface Preparation & Environmental QC
- Surface preparation grades
- Surface profile
- Dust contamination
- Soluble salts
- Relative humidity
- Dew point
- Surface temperature
- Painting conditions
- Drying and curing
Durability & Performance Testing
- Salt Spray / Neutral Salt Spray
- Humidity Resistance
- Water Immersion
- UV / Accelerated Weathering
- Powder coating cure and gel time
- Powder coating flow
- Powder coating film thickness
Defect Diagnosis & Troubleshooting
- Orange peel
- Runs and sags
- Craters / fisheyes
- Pinholes
- Adhesion failure
- Colour mismatch
- Appearance problems
- Root-cause investigation
QC Records & Field Tools
- QC inspection report checklist
- Acceptance worksheet
- DFT reading map
- Environmental inspection sheet
- Measurement record
- Defect investigation card
- Batch traceability and calibration records
- Formula cheat sheet
- ASTM/ISO quick-reference matrix
Designed for Practical Use
Rather than being a conventional textbook, this handbook is designed as a quick-reference tool.
Technical information is presented using concise explanations, formulas, tables, practical examples and inspection checklists so that a professional can quickly find the information needed during routine QC work.
ASTM & ISO References
The handbook provides references to commonly used ASTM and ISO coating test methods, helping professionals identify the relevant standard for a particular test.
Important: This handbook is a quick-reference aid and does not reproduce ASTM or ISO standards. For contractual testing, acceptance decisions and formal laboratory work, the applicable current standard, coating manufacturer’s TDS and customer/project specification should always be consulted.
Who Should Use This Book?
✔ Coating QC Inspectors
✔ Paint Shop Supervisors
✔ Coating Laboratory Technicians
✔ Paint & Coating Engineers
✔ Automotive Refinishing Professionals
✔ Industrial Coating Applicators
✔ Powder Coating Professionals
✔ Quality Assurance Professionals
✔ Paint Manufacturers
✔ Coating Students & Trainees
Reviews
There are no reviews yet.